SIMPLE AND EFFECTIVE RADIONIC ORGONE GENERATOR
[EXPERIMENTAL (Haven't Actually Made It Yet)]
This unit consists of a headphone plug and cord which goes into a stereo radionic tuner; the output of the simple but effective tuner goes to a small but powerful orgone generator.
The tuner consists of two series of five 16 ohm, 5 watt potentiometers each, one for left channel, one for right. Each knob points to a standard dial, marked 0 - 9. Any rate that totals more than 10 and less than 20 can be used safely, as the total impedance will be between 16 and 32 ohms, just right for a headphone jack output. You will be able to use many Copen (variable resistance) rates, or make up your own, as you like.
The orgone generator is easy to make, and consists of a small (perhaps 1 ounce) jar (like a snack pack or film canister) filled with steel BBs and polyester resin, or a thick mixture of polyester resin and iron filings. In the center of the cylinder is a small quartz crystal of any kind you like. Simply wind the finished core with a coil of speaker wire, and attach it to the tuner output. That's it!
I would like to see a little base and top of aluminum BBs, or maybe even a cube around it, but it's not necessary. The only thing about this unit is to keep it far enough away from your computer and other things sensitive to magnetic fields so it won't erase anything.
Rdawnrobert@aol.com
[EXPERIMENTAL (Haven't Actually Made It Yet)]
This unit consists of a headphone plug and cord which goes into a stereo radionic tuner; the output of the simple but effective tuner goes to a small but powerful orgone generator.
The tuner consists of two series of five 16 ohm, 5 watt potentiometers each, one for left channel, one for right. Each knob points to a standard dial, marked 0 - 9. Any rate that totals more than 10 and less than 20 can be used safely, as the total impedance will be between 16 and 32 ohms, just right for a headphone jack output. You will be able to use many Copen (variable resistance) rates, or make up your own, as you like.
The orgone generator is easy to make, and consists of a small (perhaps 1 ounce) jar (like a snack pack or film canister) filled with steel BBs and polyester resin, or a thick mixture of polyester resin and iron filings. In the center of the cylinder is a small quartz crystal of any kind you like. Simply wind the finished core with a coil of speaker wire, and attach it to the tuner output. That's it!
I would like to see a little base and top of aluminum BBs, or maybe even a cube around it, but it's not necessary. The only thing about this unit is to keep it far enough away from your computer and other things sensitive to magnetic fields so it won't erase anything.
Rdawnrobert@aol.com
=============================================================
Welcome To Higher Power Technologies
Advanced Metaphysical Power Tools
http://www.higherpowertech.com/
Main Page - Saturday, 01/14/06
Message Board by American Patriot Friends Network [APFN]
